Which machining workpieces are suitable for CNC machine tools?

Machining is the use of mechanical equipment to process materials, cut materials, and process the required workpiece shape. The shape, size, relative position and performance of the blank are strictly in accordance with the pattern and size on the drawing, so as to form qualified parts.

Machining is divided into manual processing and numerical control processing. Nowadays, with the implementation of intelligent manufacturing, more and more CNC machine tools have replaced traditional machine tools and become mechanical processing equipment. So, which mechanical workpieces are suitable for CNC machine tool processing?

01

Mass production of various parts

Many processed workpieces have the characteristics of non-standardization, customization, and batch production, and there are various types, which are suitable for CNC machine tool production. With the gradual reduction of the manufacturing cost of CNC machine tools, if the adjustment time of the program and the preparation time of the tooling can be shortened, it is also suitable for processing very small batches and single-piece production.

02

Parts requiring high precision

Because the CNC machine tool has good rigidity, high manufacturing precision, precise cutting tools, and convenient size compensation, it is suitable for parts that require high dimensional accuracy.

03

Parts with small surface roughness values

The surface roughness depends on the cutting speed and feed rate when the material of the workpiece and the tool, the finishing allowance and the angle of the tool are fixed. The speed of ordinary machine tools is constant, and the cutting speed of different diameters is different. The CNC machine tool has the function of constant linear speed cutting, and the same linear speed can be used to ensure that the surface roughness value of the vehicle end face and outer circle with different diameters is small and consistent. When machining surfaces with different surface roughness, choose a lower feed rate for the surface with small roughness, and choose a higher feed rate for the surface with large roughness, which has good variability, which is difficult to do in ordinary machine tools arrived.

04

Components with complex contour shapes

A straight line or arc can be used to approach any plane curve, and the CNC machine tool has the function of arc interpolation, which can process various parts with complex contours.