Types of Engraving Machine Knives

Engraving machines are relatively common in our lives and are used more often. For the use of engraving machines, the type of tool cannot be ignored. For the engraving of the engraving machine to drive, it is carved by hand one by one, which takes a long time and requires a lot of work.

  With the development of social science and technology, the emergence of engraving machines and the development of engraving machine technology, most of the engraving products now have many engraving processes, and can achieve standardized production, and the time is greatly reduced. There are still artificial fine carvings. The use of engraving machine knives is an art, and different types of knives can produce different effects. Let's briefly talk about the types of engraving machine knives.

1. The single-blade spiral ball end milling cutter is suitable for deep relief processing of cork, density board, native wood, pvc, etc.

2. Single-edged and double-edged upper and lower cutting milling cutters are facing the processing, and the cutting process without burrs on the upper and lower sides is more suitable.

3. The double-edged straight-groove milling cutter is more suitable for multi-layer boards and plywood processing tools.

4. Multi-stripe milling cutter rough machining particleboard, multi-stripe milling cutter is one of the necessary tools.

5. The single-edged helical milling cutter is fast and efficient during processing, and does not stick to chips. Because of its special manufacturing process, it can ensure that it does not burst during processing. The extremely fine knife pattern is suitable for acrylic cutting processing.

6. The characteristic of the double-edged large chip-removal helical milling cutter is that it does not turn black or emit smoke. It has two high-capacity chip-removal grooves. The double-edged design not only has a good chip-removal function, but also can achieve Tool balance, especially suitable for processing high-density boards.

7. The single-edged special aluminum milling cutter does not stick to the knife during processing, and the speed is fast, and the efficiency is high, which is especially suitable for aluminum plate processing.

8. The round bottom carving knife is used for precision small relief processing.