How to keep the performance of CNC drilling machine stable

As we all know, high-precision parts are inseparable from high-end CNC drilling machines. What can we do to maintain machine tool performance? Many enterprises and individuals often do not pay enough attention to it, and the equipment is damaged before its normal service life. In this regard, the editor has summarized a few points that need everyone's attention.

1. It is strictly forbidden to accumulate waste materials in the CNC drilling machine processing warehouse

Excessive waste accumulation will cause damage to the sheet metal of the CNC drilling machine, the machine tool is overloaded, and after the sheet metal is damaged, the waste will enter the guide rail rod, slider and other parts, causing hardware scratches and wear damage.

2. Seal the CNC drilling machine electrical cabinet and other parts

If the electrical cabinet is not well sealed, the oil will enter the electrical cabinet and cause damage to various electrical components.

3. Lubricate CNC drilling machine guide rail rod and other components

In order to reduce the friction of moving parts, lubricating oil plays a great role. If the machine tool lacks oil, the moving parts will be damaged soon. Know the importance of lubrication. CNC machine tools basically have automatic lubrication devices and fastening systems. Machine tool lubrication Lubricants are generally divided into two types: grease and lubricating oil, and the lubrication system is generally divided into two types: automatic device and manual device. There is generally no problem with the automatic lubricating oil device, because there is no oil, the oil pressure is too low or there is no pressure relief, it will alarm, pay attention The automatic refueling device for adding oil, because this kind of quantitative oil separator is damaged in one way, it will not alarm, and the machine tool that needs to add oil manually must be added regularly, because it does not have an alarm system, and other auxiliary parts of the machine tool should also be regularly added. Add quantitatively to prevent machine tools from being damaged due to lack of oil.

4. The impact of changing the jig on the CNC drilling machine, shifting the machine tool

Because the machine tool will be affected by road bumps and the relocation of the machine tool itself during relocation or relocation, resulting in hardware damage and poor geometric accuracy of the machine tool, the relocation of the machine tool should be minimized. If you want to relocate, you need professionally trained personnel. In order to reduce damage to machine tools, we should also pay attention when replacing metallurgical tools. Sometimes, if the rack metallurgical tool is not careful, it can cause damage to the machine tool hardware. After running for a long time, the indentation will become larger and larger, resulting in damage to the machine tool. Only replace with new parts

5. Heat dissipation of spindle motor and other components

If the heat dissipation of the machine tool is not good, it will accelerate the wear of machine tool bearings and other components, shorten the service life of drive electronic components, and maintain the cooling fans and other components of the machine tool in time to prevent machine tool components from being damaged at high temperatures.

6. Whether the sheet metal of the CNC drilling machine is deformed, which affects the shedding

First check whether the machine tool sheet metal screws are loose and fall off, whether the machine tool sheet metal is damaged, abnormal noise, deformation, if there is such a phenomenon, the rhythm is about to deteriorate.

7. Regularly clean the CNC drilling machine water tank

If the water tank of the machine tool is not cleaned regularly, the pump will often be blocked, resulting in unstable water flow, damage to props, and unstable product quality. Although it is small, it may be an important factor for unstable product quality.

8. Specifications for smelting tools and fixed auxiliary shaft tubes

The air pipe of the machine tool, the probe line of the tool instrument line, and the auxiliary shaft are fixed to prevent the machine tool from being broken during operation, causing the machine tool to collide or the accessories to be damaged.

9. The air source is clean and dry

Some companies have a lot of water in the air in summer, and the air triple combination cannot completely filter it out. Our machine tools use air sources in many places, such as spindles, motors, cylinders, cooling systems, etc. Once water enters these places, it is easy to damage,

10. Inspection and maintenance of CNC drilling machine

The daily inspection of machine tools should be in place to prevent failures.

Pay attention to the above ten points when using a CNC drilling machine, which can ensure the performance of the machine tool.